INSERTABLE DE LEÑA METLOR ELOS 98 VITRUS 10.2 KW

METLOR ELOS 98 VITRUS 10.2 KW WOOD BURNING INSERTABLE

- Performance: 82.3%

- Smoke outlet: 180 mm

- Weight: 130kg

- Fan flow: 300 m3

- Firewood length: 750 mm

- Dimensions (width x height x depth) mm: 983 x 595 x 440

- Outside air intake

The Elos 98 is a wood-ventilated insert with a power of 10kW. Made of carbon steel sheet, with a thickness in the combustion chamber of 3 mm and 5 mm in the upper part and in the smoke outlet, the front of the recuperator is made up of cast aluminum components, where the firewood rests. made of steel. With a 4mm thick Neoceramic glass and a thermal amplitude of up to 900°C. In the paint, specialized ink is used for high temperature equipment up to 650°C. All parts inherent to the device are made of steel. Equipped with 2 285x50mm tangential fans operated by thermostat at + - 50ºC. Option of two Ø100mm hot air outlets. Interior in 20mm thick vermiculite.

For the installer:

 - The Insertable must be installed so that the smoke outlet is as plumb as possible and at least 5 cm away from the wall to ensure good air circulation. - Curves, if they exist, must not have angles greater than 45º. - The exterior outlet must exceed the nearest obstacle and the cover by at least 50 cm, to obstruct the smoke outlet as little as possible. - The metal tube for the smoke outlet must be kept away from any combustible material. - For more than 1 unit or open fireplace, the same fireplace will never be used. - Place insulated pipes, when the chimney goes outside. - Maintain a minimum safety zone of 1.5m. between the stove and combustible materials