METLOR ELOS 60 VITRUS 6.5 KW WOOD BURNING INSERTABLE

METLOR ELOS 60 VITRUS 6.5 KW WOOD BURNING INSERTABLE

- Power: 6.5 Kw

- Yield: 75%

- Smoke outlet: 150 mm

- Weight: 100kg

- Fan flow: 132 m3

- Log length: 420 mm

- Dimensions (width x height x depth) mm: 600 x 540 x 430

The Elos 60 Vitrus is an insert with wood ventilation with a power of 6.5kW. Made of carbon steel sheet, with a thickness in the combustion chamber of 3mm and 5mm in the upper part and in the smoke outlet, the front of the recuperator is made up of cast aluminum components, where the firewood rests is made of steel. With a 4mm thick Neoceramic glass and a thermal amplitude of up to 900°C. In the paint, specialized ink is used for high temperature equipment up to 650°C. All parts inherent to the device are made of steel. Equipped with 1 285x50mm tangential fan with ON/OFF control. Option of two Ø100mm hot air outlets. Interior in 20mm thick vermiculite

Information for the installer:

- The Insertable must be installed so that the smoke outlet is as plumb as possible and at least 5 cm away from the wall to ensure good air circulation.

- Curves, if they exist, must not have angles greater than 45º.

- The exterior outlet must exceed the nearest obstacle and the cover by at least 50 cm, to obstruct the smoke outlet as little as possible.

- The metal tube for the smoke outlet must be kept away from any combustible material.

- For more than 1 unit or open fireplace, the same fireplace will never be used.

- Place insulated pipes, when the chimney goes outside.

- Maintain a minimum safety zone of 1.5m. between the stove and combustible materials